WeChat
International brand agency
For you to create a very high quality audio-visual feast
CPS14P 14-inch three-way speaker
The CPS-14P is a high-output, extremely compact and powerful 3-way, dual-amplified DSP integrated, coaxial point source element designed for touring and fixed installations. It uses a low-distortion 14-inch (4-inch DUO dual-layer voice coil) custom woofer for low frequencies, employing proprietary Malt Cross cooling technology, FEA-optimized neodymium magnet circuit, aluminum demodulation ring, and weatherproof cone. For mid/high frequencies, it uses an ultra-lightweight 1.4-inch dual-diaphragm coaxial compression driver. The unique voice coil technology uses lightweight copper-clad aluminum wire, wound internally and externally in a Kapton former to improve heat dissipation, significantly increasing the driver's acoustic output and reliability while minimizing power compression. The larger annular midrange diaphragm covers a frequency range of 300Hz to 7KHz with a smooth, linear response. The ultra-lightweight annular diaphragm used for high frequencies provides superior transient response with very high efficiency in the 4KHz to 22KHz range. Each driver integrates two subsystems covering smaller frequency ranges to increase power handling, high dynamics, and extremely low distortion, providing excellent phase coherence and perfect time alignment without the problems of multi-source interference. The enclosure is constructed from high-grade birch plywood and coated with polyurea for increased durability and weather protection.
CPS-210P dual 10-inch three-way speaker
The CPS-210P is a high-output, extremely compact, and exceptionally powerful three-way, bi-amplified, coaxial point source element designed for medium-sized touring and fixed installations. It uses two low-distortion 10-inch (3-inch DUO dual voice coil) loudspeakers for low frequencies, featuring exclusive Malt Cross cooling technology, FEA-optimized neodymium magnet circuits, aluminum demodulating rings, and weather-resistant cones. For mid/high frequencies, it uses an ultra-lightweight 1.4-inch exit throat neodymium coaxial compression driver. The unique voice coil technology uses lightweight copper-clad aluminum wire, wound inside and out on a Kapton former to improve heat dissipation, significantly increasing the driver's acoustic output and reliability while minimizing power compression. The larger annular mid-frequency diaphragm covers a frequency range of 300Hz to 7KHz with a smooth, linear response. The ultra-lightweight annular diaphragm for high frequencies provides excellent transient response and very high efficiency within the 4KHz to 22KHz range. Each driver integrates two subsystems, covering smaller frequency ranges to increase power handling, high dynamics, and extremely low distortion, while providing excellent phase consistency and perfect time alignment without multi-source interference issues. The enclosure is made of high-grade birch plywood and coated with polyurea for enhanced durability and weather protection.
CLS-28P Dual 8-inch Array Speaker
CLS-212P Dual 12-inch Array Speaker
CLS-118SP 18-inch low-frequency speaker
CLS-121SP 21-inch low-frequency speaker
VMX88L Advanced Digital Audio Dynamic Processing Management System
The VMX88L offers the advantages and experience of our on-site sound filter and dynamic algorithms for fixed installation products. Each of the 8 analog input channels features an advanced compressor with an adjustable knee point, a 24dB/OCT high-pass filter, 8 selectable types of EQ, 2-stage dynamic equalization (DEQ), and adjustable delay of up to 1.3 seconds. The full matrix signal mixer allows analog inputs to be mixed to any output channel, providing flexibility in system design. All 8 analog outputs are equipped with 48dB/OCT high-pass and low-pass filters, 16 selectable types of EQ, adjustable delay of up to 1.3 seconds, and a state-of-the-art high-performance two-stage Predictive eXcursion Limiter (PXL) limiter design, aimed at providing optimal drive protection and minimal distortion. All analog audio interfaces use 3-pin 5.08mm pitch Phoenix connectors, with 4 GPI connections that allow customizable operational configurations (such as fire alarm mute and preset recall), and up to 30 presets can be stored and recalled, allowing for the selection of input, matrix, and output combinations. Our D-Net based Ethernet PC, Mac, and iPad control software not only allows you to control all devices on the network but also enables flexible storage of preset memories and system configurations (including in offline mode). The VMX88L is also fully compatible with our VR1 PoE remote control panel for simple and flexible user control, and can be controlled via simple Ethernet control protocols through third-party systems (such as Crestron, AMX, etc.).
VMX88 Advanced Digital Audio Dynamic Processing Management System (Dante)
The VMX88 provides the advantages and experience of our on-site sound filter and dynamic algorithms for fixed installation products. Each of the 8 analog input channels features an adjustable knee high-level compressor and a 24dB/OCT high-pass filter, 8 selectable types of EQ, 2-stage dynamic equalization (DEQ), and adjustable delay of up to 1.3 seconds. The full matrix signal mixer allows not only analog inputs but also the mixing of 8 Dante network audio input channels to any output channel, providing flexibility in system design by routing audio channels from multiple stages of the audio chain to the 8 channels of Dante network output. There are 8 analog outputs, each equipped with 48dB/OCT high-pass and low-pass filters, 16 selectable types of EQ, adjustable delay of up to 1.3 seconds, and a state-of-the-art high-performance two-stage Predictive eXcursion Limiter (PXL) limiter design, aimed at providing optimal drive protection and minimal distortion. All analog audio interfaces use 3-pin 5.08mm pitch Phoenix connectors, with 4 GPI connections that allow customizable operational configurations (such as fire alarm mute and preset recall), and up to 30 presets can be stored and recalled, allowing for the selection of input, matrix, and output combinations. Our D-Net based Ethernet control software for PC, Mac, and iPad not only allows you to control all devices on the network but also provides flexible storage of preset memories and system configurations (including in offline mode). The VMX88 is also fully compatible with our VR1 PoE remote control panel for simple and flexible user control, and can be controlled via simple Ethernet control protocols through third-party systems (such as Crestron, AMX, etc.).
