T Series Professional Power Amplifier
Stereo/Parallel/Mono Bridged Mode; XLR Input Interface; XLR Parallel Output Interface 2 Gain Control Knobs, 1 Power Switch, 1 Standby LED Light, 2 Sets of 8 Indicator Lights Corresponding to Channel Working, Signal, Clipping, and Protection Status; Protection Circuits to Prevent Short Circuits, Overloads, Power On/Off Noise, DC Output, Over Temperature Peak Limiting, etc.; Soft Start on Power Up to Prevent Surge Current Impact; Fan Cooling with Fast Wind Speed Adjustment.
- Product Description
-
Power
T2.6
T2.8
T2.10
4 ohms stereo (per channel)
8 ohms stereo (per channel)
8 ohms bridged
900W
600W
1200W
1200W
800W
1600W
1500W
1000W
2000W
Performance
Frequency response
20Hz-20kHz , +0/- 1d B
Total harmonic distortion (THD)
<0 .5% ,20Hz - 20kHz
Intermodulation distortion ( IMD) 4:1 The values are:
60Hz and 7kHz from maximum to -30d B
≤0 .35%
Slew rate
> 15V/us
Voltage gain
37d B
39d B
40d B
Damping factor (8 ohms), 10Hz -400Hz
>300
Signal-to-noise ratio (referenced to rated output power, 20 Hz to 20 kHz, A-weighted)
> 100d B
Input sensitivity (Rated power, 8 ohms)
0 .775V
Input impedance (Rated )
Balanced/Unbalanced
20k ohms/10k ohms
Connector , control keys and indicator lights
Input connector
One balanced per channel XLR
Output connector (Speaker connection interface )
4 per channel - POLE Speakon®
Front panel controls
Power switch, channel gain control knob
Rear panel controls
Output mode switch: stereo , parallel, bridged ground switch
Power indicator/standby indicator
Blue LED ( Power ) / Orange LED (Standby )
Signal indicator
One blue per channel LED
Clipping/thermal compression indicator
One blue per channel LED
Fault
One blue per channel LED, indicating the channel is in protection mode
Power cable specifications
Plug: 10A, 250V Power cable: CCC 3*1 .5 mm2
Structure
Protection
Peak limiting, overcurrent protection, short circuit protection, overheating protection, soft start on power-up
Ventilation
Air convection mechanism from front to back
Cooling
Internal air forced expulsion, fan cooling, rapid adjustment , temperature protection
Dimensions (W*H*D)
19"x3 .5"x 14 .9"(483mmx89mmx378mm)
Features:Stereo/parallel/mono bridged mode; XLR input interface; XLR parallel output interface
2 gain control knobs, 1 power switch, 1 standby LED, 2 sets of 8 indicator lights corresponding to channel working, signal, clipping, protection status; prevent short circuit, overload, on/off noise, output DC, over-temperature peaks
Value limiting and other protection circuits; soft start on power-up, surge current impact prevention; fan cooling, rapid wind speed adjustment
This product meets the following standards:Safety: IEC60065-2001 Safety requirements for audio, video and similar electronic equipment
GB8898-2011 Safety requirements for audio, video and similar electronic equipment EMC: GB13837-2003 Radio disturbance characteristics limits and measurement methods for sound and television broadcast receivers and associated equipment GB17625.1-2003 Low voltage
Limit values of harmonic currents emitted by electrical and electronic equipment: Equipment input current is less than or equal to 16A.
Related Products
Product Message
*Reminder: Please fill in the information accurately and maintain smooth communication. We will contact you as soon as possible.