VMO16 16-channel output advanced digital audio processing management system (Dante)
The VMO16 provides the advantages and experience of our on-site sound filter and dynamic algorithms for fixed installation products, featuring a 16X16 channel matrix audio signal mixer. This allows any Dante audio signal from the Dante network input to be routed to any analog output channel, providing flexibility in system design. All 16 analog outputs are equipped with high-pass and low-pass filters with a maximum of 48dB/OCT, 16 selectable types of EQ, adjustable delay of up to 1.3 seconds, and a state-of-the-art high-performance two-stage Predictive eXcursion Limiter (PXL) design, aimed at providing optimal drive protection and minimal distortion. All analog audio interfaces use 3-pin 5.08mm pitch Phoenix connectors, with 4 GPI connections that allow customizable operational configurations (such as fire alarm mute and preset recall), and up to 30 presets can be stored and recalled, allowing for the selection of recall combinations for inputs, matrix, and output sections. Our D-Net based Ethernet control software for PC, Mac, and iPad not only allows you to control all devices on the network but also enables flexible storage of preset memories and system configurations (including in offline mode). The VMO16 is also fully compatible with our VR1 PoE remote control panel for simple and flexible user control, and can be controlled via simple Ethernet control protocols through third-party systems (such as Crestron, AMX, etc.).
- Product Application: Bar, Party K room, etc.
- Product Description
-
VMO16 Technical Details
Analog Output: 16
Electronic Balance, Phoenix Connector
Maximum Level: >20dBu
Dynamic Range: >119dB (20Hz-20kHz A-weighted)
Performance Parameters
Frequency Response: (20Hz to 20kHz): +/-0.05dB
Total Harmonic Distortion + Noise (-10dB @ 1kHz): 0.0005%
Latency: 0.283ms
Processor Main Functions [96kHz]
Output multiple types of selectable EQ (per channel): 16 – Parametric, Low shelf, High shelf, Band-pass, Notch, Phase, Allpass, Low Pass Filter, High Pass Filter.
Output High-pass and Low-pass filters (per channel): Maximum 48dB/OCT slope (Bensen/Butterworth/Bessel/Linkwitz Riley)
Output Gain (per channel): -30 to +15dB, 0.1dB steps, Mute, +/- Polarity (+/- Phase)
Output Delay (per channel): 0 to 1.3s, minimum increment 1us (<10ms), minimum increment 0.01ms (>10ms and <100ms), minimum increment 0.1ms (>100ms and <1000ms), minimum increment 0.001s (>1s).
Output (PXL) Limiter (per channel): Start Threshold (-50 to +22 dBu), Attack Time, Release Time, Auto Start/Release Time Options
Presets: Up to 30
Network Audio: 16in/16out Dante channel connector on dual redundant RJ45
Communication Interface: 100Mbps Ethernet Interface (Ethernet Connector)
Power Requirements
3-pin IEC Input, Fuse
90-240VAC, 50-60Hz < 40W
Dimensions
Height: 44mm (1.75inch) 1U
Depth: 170mm (6.75 inches)
Width: 482mm (19 inches)
Weight
Net Weight: 2.2kg
Shipping Weight: 3.4kg
Due to continuous product improvements, the above specifications may vary.
Related Products
Product Message
*Reminder: Please fill in the information accurately and maintain smooth communication. We will contact you as soon as possible.