VR1 Overview

This panel is designed to be installed in a single-unit standard UK electrical wall box (a US version is available upon request). The VR1 is powered by a PoE (Power over Ethernet) router, requiring only a standard Ethernet cable for power and control. The second-generation design reduces the in-wall depth by nearly 40% (from 45mm to 28.2mm) and is now fully enclosed at the back.

The VR1 is programmed using NST Audio D-Net software, allowing it to be set up to control one or more NST Audio processors connected to the same network as the wall panel.

The VR1 allows for multi-page custom remote access to the following parameters:

• Channel and matrix gain
• Routing and channel mute
• Preset recall

Once set up, the VR1 requires no technical knowledge to operate, enabling venue staff to easily use the device. The full-color 128 x 128 pixel LCD display allows installation engineers to label all pages, leaving venue staff with a clear, simple, and easy-to-use remote control that enables them to adjust the audio system's configuration and volume from multiple locations throughout the venue.